Silver lithography glass processing method

Silver lithography glass processing method:

First, the plate glass was washed with clean water and then completely coated with paraffin. Then, various patterns were engraved on the paraffin, and the glass surface was corroded with a 1:5 hydrofluoric acid solution. Finally, the hydrofluoric acid is removed and paraffin wax is removed, and the glass is washed with water.

Others such as stained glass can be used to paste or spray processing method, the specific method is omitted. Strike the line on the ground and vertical walls to fix the lower wall structure, the pillar beam, and cut the glass to install the upper and full wood (metal) frame, glass installation, trimming paint and cleaning.

Leave a Reply